PLANET WGSW-50040 - Manual (Page 411)

Collector port is 6343 the sFlow global destination port is the defaulted 6343
Sampler priority is 2 The priority of sFlow when receiving packets from the hardware is
2.
Sflow DataSource: type 2, index
194(Ethernet1/1)
One sample proxy data source of the sFlow is the interface e1/1
and its type is 2 (Ethernet), the interface index is 194.
Collector address is 192.168.1.200 The analyzer address of the sampling address of the E1/1
interface is 192.168.1.200
Collector port is 6343 Default value of the port on E1/1 interface sampling proxy is
6343.
Counter interval is 20 The statistic sampling interval on e1/1 interface is 20 seconds
Sample rate is input 10000, output 0 The ingress traffic rate of e1/1 interface sampling proxy is 10000
and no egress traffic sampling will be performed
Sample packet max len is 1400 The length of the sFlow group data sent by the e1/1 interface
should not exceed 1400 bytes.
Sample header max len is 50 The length of the packet data head copied in the data sampling of
the e1/1 interface sampling proxy is 50
Sample version is 4 The datagram version of the sFlow group sent by the E1/1
interface sampling proxy is 4.
Chapter 31 Commands for
SNTP
31.1 debug sntp
Command:
debug sntp {adjust | packet | select }
no debug sntp {adjust | packet | select}
Function:
Displays or disables SNTP debug information.
Parameters:
adjust stands for SNTP clock adjustment information;
packet for SNTP packets,