PLANET WGSW-50040 - Manual (Page 199)

Ethernet1/2 Port name
Attached Policy Map for Ingress:
p1
Policy name bound to port
ClassMap ClassMap name
classified Total data packets match this ClassMap.
in-profile Total in-profile data packets match this ClassMap.
out-profile Total out-profile data packets match this ClassMap.
Switch #show mls qos vlan 100
Vlan 100：
Attached Policy Map for Ingress: p1
Classmap classified in-profile out-profile (in packets)
c1 20 10 10
c2 NA NA NA
10.22 show mls qos maps
Command:
show mls qos maps [cos-dp | dscp-dscp | dscp-intp | dscp-dp | intp-dscp] | [begin | include |
exclude <regular-expression>]
Function:
Display the configuration of QoS mapping.
Parameters:
cos-dp: The mapping from ingress L2 CoS to drop precedence
dscp-dscp: The mapping from ingress DSCP to DSCP
dscp-intp: The mapping from ingress DSCP to internal priority
dscp-dp: The mapping from ingress DSCP to drop precedence
intp-dscp: The mapping from egress internal priority to DSCP
Command mode:
Admin and Configuration Mode.
Usage Guide:
Display the map configuration information of QoS.
Example:
Display configuration information of the mapping table.
Switch # show mls qos maps