PLANET WGSW-50040 - Manual (Page 59)

Displayed Information Explanation
View Name View name
1.and1.3. OID number
Included The view includes sub trees rooted by this OID
Excluded The view does not include sub trees rooted by
this OID
active State
1.4.11 snmp-server community
Command:
snmp-server community {ro | rw} <string> [access {<num-std>|<name>}] [ipv6-access
{<ipv6-num-std>|<ipv6-name>}] [read <read-view-name>] [write <write-view-name>] no
snmp-server community <string> [access {<num-std>|<name>}] [ipv6-access
{<ipv6-num-std>|<ipv6-name>}]
Function:
Configure the community string for the switch; the “no snmp-server community <string> [access
{<num-std>|<name>}] [ipv6-access {<ipv6-num-std> |<ipv6-name>}] “command deletes the
configured community string.
Parameter:
<string> is the community string set;
ro | rw is the specified access mode to MIB, ro for read-only and rw for read-write.
<num-std> is the access-class number for standard numeric ACL, ranging between 1-99;
<name> is the access-class name for standard ACL, the character string length is ranging between
1-32;
<ipv6-num-std> is the access-class number for standard numeric IPv6 ACL, ranging between
500-599;
<name> is the access-class name for standard IPv6 ACL, the character string length is ranging
between 1-32.
<read-view-name> is the name of readable view which includes 1-32 characters.
<write-view-name> is the name of writable view which includes 1-32 characters.
Command mode:
Global Mode
Usage Guide:
The switch supports up to 4 community strings. It can realize the access-control for specifically
community view by binding the community name to specifically readable view or writable view.
Example: