PLANET WGSW-50040 - Manual (Page 58)

1.4.9 show snmp user
Command:
show snmp user
Function:
Display the user information commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp user
User name: initialsha
Engine ID: 1234567890
Auth Protocol:MD5 Priv Protocol:DES-CBC
Row status:active
Displayed Information Explanation
User name User name
Engine ID Engine ID
Priv Protocol Employed encryption algorithm
Auth Protocol Employed identification algorithm
Row status User state
1.4.10 show snmp view
Command:
show snmp view
Function:
Display the view information commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp view
View Name:readview 1. -Included active
1.3. Excluded active