PLANET WGSW-50040 - Manual (Page 49)

Example:
Switch#show ssh-server
ssh server is enabled
ssh-server timeout 180s
ssh-server authentication-retries 3
ssh-server max-connection number 6
ssh-server login user number 2
1.2.18 show telnet login
Command:
show telnet login
Function:
Display the information of the Telnet client which currently establishes a Telnet connection with the
switch.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Check the Telnet client messages connected through Telnet with the switch.
Example:
Switch#show telnet login
Authenticate login by local
Login user:
aa
1.3 Commands for Configuring Switch IP
1.3.1 interface vlan
Command:
interface vlan <vlan-id>
no interface vlan <vlan-id>
Function:
Enter the VLAN interface configuration mode; the no operation of this command will delete the
existing VLAN interface.
Parameters: