PLANET WGSW-50040 - Manual (Page 63)

will be disabled.
Example:
Create a group CompanyGroup, with the safety level of recognizing andencrypting, the read
viewname isreadview, and the writing is disabled.
Switch (config)#snmp-server group CompanyGroup AuthPriv read readview
deletet group
Switch (config)#no snmp-server group CompanyGroup AuthPriv
1.4.16 snmp-server host
Command:
snmp-server host { <host-ipv4-address> | <host-ipv6-address> } {v1 | v2c | {v3
{NoauthNopriv | AuthNopriv | AuthPriv}}} <user-string>
no snmp-server host { <host-ipv4-address> | <host-ipv6-address> } {v1 | v2c | {v3
{NoauthNopriv | AuthNopriv | AuthPriv}}} <user-string>
Function:
As for the v1/v2c versions this command configures the IPv4 or IPv6 address and Trap community
character string of the network manage station receiving the SNMP Trap message. And for v3
version, this command is used for receiving the network manage station IPv4 or IPv6 address and
the Trap user name and safety level; the “no” form of this command cancels this IPv4 or IPv6
address.
Command Mode:
Global Mode.
Parameter:
<host-ipv4-addr> | <host-ipv6-addr> is the IP address of the NMS managing station which
receives Trap message.
v1 | v2c | v3 is the version number when sending the trap.
NoauthNopriv | AuthNopriv | AuthPriv is the safety level v3 trap is applied, which may be non
encrypted and non authentication, non encrypted and authentication, encrypted and authentication.
<user-string> is the community character string applied when sending the Trap message at v1/v2,
and will be the user name at v3.
Usage Guide:
The Community character string configured in this command is the default community string of the
RMON event group. If the RMON event group has no community character string configured, the
community character string configured in this command will be applied when sending the Trap of
RMON, and if the community character string is configured, its configuration will be applied when