PLANET WGSW-50040 - Manual (Page 73)

Displayed information Explanation
Timeout Timeout time.
Retry Times Retransmission times.
1.5.9 tftp-server enable
Command:
tftp-server enable
no tftp-server enable
Function:
Start TFTP server, the “no ftp-server enable” command shuts down TFTP server and prevents
TFTP user from logging in.
Default:
TFTP server is not started by default.
Command mode:
Global Mode
Usage Guide:
When TFTP server function is enabled, the switch can still perform tftp client functions. TFTP server
is not started by default.
Example:
Enable TFTP server service.
Switch#config
Switch(config)#tftp-server enable
Relative Command:
tftp-server timeout
1.5.10 tftp-server retransmission-number
Command:
tftp-server retransmission-number <number>
Function:
Set the retransmission time for TFTP server.
Parameter:
<number> is the time to re-transfer, the valid range is 1 to 20.
Default:
The default value is 5 retransmission.