PLANET WGSW-50040 - Manual (Page 335)

Commands for Security Function Chapter 6 Commands for TACACS+
igmp-type (optional) ICMP packets can be filtered by IGMP packet name or packet type which is a
number from 0-255;
<time-range-name>, name of time range.
Command Mode:
Name extended MAC-IP access-list configuration mode
Default:
No access-list configured.
Examples:
Deny the passage of UDP packets with any source MAC address and destination MAC address,
any source IP address and destination IP address, and source port 100.
Switch(config)# mac-ip-access-list extended macIpExt
Switch(Config-MacIp-Ext-Nacl-macIpExt)# deny any-source-mac any-destination-mac
udp any-source s-port 100 any-destination
21.23 show access-lists
Command:
show access-lists [<num>|<acl-name>]
Functions:
Reveal ACL of configuration.
Parameters:
<acl-name>, specific ACL name character string;
<num>, specific ACL No.
Command Mode:
Admin Mode.
Usage Guide:
When not assigning names of ACL, all ACL will be revealed, used x time（s）indicates the times of
ACL to be used.
Examples:
Switch#show access-lists
access-list 10(used 0 time(s))
access-list 10 deny any-source
access-list 100(used 1 time(s))
access-list 100 deny ip any any-destination
access-list 100 deny tcp any any-destination