PLANET WGSW-50040 - Manual (Page 128)

7.1.14 show gvrp
Command:
show gvrp [<interface-name>]
Function:
Display the global and port information for GVRP.
Parameter:
<interface-name> stands for the name of the Trunk port to be displayed.
Command mode:
Admin Mode and other configuration Mode.
Example:
Display global GVRP information.
Switch#show gvrp configuration
---------------- Gvrp Information ------------------
Gvrp status : enable
Gvrp Timers(milliseconds)
LeaveAll : 10000
7.1.15 show vlan
Command:
show vlan [brief | summary] [id <vlan-id>] [name <vlan-name>] [internal usage [id <vlan-id> |
name <vlan-name>]]
Function:
detailed information for all VLANs or specified VLAN.
Parameter:
brief stands for brief information;
summary for VLAN statistics;
<vlan-id> for VLAN ID of the VLAN to display status information, the valid range is 1 to 4094;
<vlan-name> is the VLAN name for the VLAN to display status information, valid length is 1 to 11
characters.
Command mode:
Admin Mode and configuration Mode.
Usage Guide:
If no <vlan-id> or <vlan-name> is specified, then information for all VLANs in the switch will be
displayed.
Example: