PLANET WGSW-50040 - Manual (Page 53)

Switch(Config-if-Vlan1)#exit
Switch(config)#
1.4 Commands for SNMP
1.4.1 debug snmp mib
Command:
debug snmp mib
no debug snmp mib
Function:
Enable the SNMP mib debugging; the "no debug snmp mib” command disables the debugging.
Command Mode:
Admin Mode.
Usage Guide:
When user encounters problems in applying SNMP, the SNMP debugging is available to locate the
problem causes.
Example:
Switch#debug snmp mib
1.4.2 debug snmp kernel
Command:
debug snmp kernel
no debug snmp kernel
Function:
Enable the SNMP kernel debugging; the “no debug snmp kernel” command disables the
debugging function.
Command Mode:
Admin Mode.
Usage Guide:
When user encounters problems in applying SNMP, the SNMP debugging is available to locate the
problem causes.
Example: