PLANET WGSW-50040 - Manual (Page 85)

Cluster VLAN: 1
Role: commander
IP pool: 10.254.254.1
Cluster name: MIS_zebra
Keepalive interval: 30
Keepalive loss-count: 3
Auto add: Disabled
Number of Members: 0
Number of Candidates: 3
----in a member ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Member
Commander Ip Address: 10.254.254.1
Internal Ip Address: 10.254.254.2
Commamder Mac Address: 00-12-cf-39-1d-90
---- a candidate ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Candidate
---- disabled ----------------------------
Switch#show cluster
Status: Disabled
2.15 show cluster members
Command:
show cluster members [id <member-id> | mac-address <mac-addr>]
Function:
Display member information of a cluster. This command can only apply to commander switches.
Parameters:
member-id: member id of the switch.
mac-addr: the CPU mac addresses of member switches.
Default: