PLANET WGSW-50040 - Manual (Page 395)

Configure control VLAN of mrpp ring 4000 is 4000.
Switch(config)#mrpp ring 4000
Switch(mrpp-ring-4000)#control-vlan 4000
28.2 clear mrpp statistics
Command:
clear mrpp statistics [<ring-id>]
Function:
Clear statistic information of MRPP data packet of MRPP ring receiving and transferring.
Parameter:
<ring-id> is MRPP ring ID, the valid range is from 1 to 4096, if not specified ID, it clears all of MRPP
ring statistic information.
Command Mode:
Admin Mode.
Example:
Clear statistic information of MRPP ring 4000 of switch.
Switch#clear mrpp statistics 4000
28.3 debug mrpp
Command:
debug mrpp
no debug mrpp
Function:
Open MRPP debug information; “no description” command disables MRPP debug information.
Command Mode:
Admin Mode
Usage Guide:
Enable MRPP debug information, and check message process of MRPP protocol and receive data
packet process, it is helpful to monitor debug.
Example:
Enable debug information of MRPP protocol.