PLANET WGSW-50040 - Manual (Page 401)

Command Mode:
MRPP ring mode
Default:
Default the node mode is secondary node.
Example:
Configure the switch to primary node. MRPP ring 4000.
Switch(config)# mrpp ring 4000
Switch(mrpp-ring-4000)#node-mode master
28.12 show mrpp
Command:
show mrpp [ring-id>]
Function:
Display MRPP ring configuration.
Parameter:
<ring-id> is MRPP ring ID, the valid range is from 1 to 4096, if not specified ID, it display all of
MRPP ring configuration.
Command Mode:
Admin and Configuration Mode.
Example:
Display configuration of MRPP ring 4000 of switch
Switch# show mrpp 4000
28.13 show mrpp statistics
Command:
show mrpp statistics [<ring-id>]
Function:
Display statistic information of data packet of MRPP ring receiving and transferring.
Parameter:
<ring-id> is MRPP ring ID, the valid range is from 1 to 4096, if not specified ID, it displays all of
MRPP ring statistic information.