PLANET WGSW-50040 - Manual (Page 271)

Commands for Security Function Chapter 6 Commands for TACACS+
Example:
Switch#show trustview status
Primary TrustView Server 200.101.0.9:9119
TrustView version2 message inform successed
TrustView inform free resource successed
TrustView inform web redirect address successed
TrustView inform user binding data successed
TrustView version2 message encrypt/digest enabled
Key: 08:02:33:34:35:36:37:38
Rcvd 106 encrypted messages, in which MD5-error 0 messages, DES-error 0 messages
Sent 106 encrypted messages
Free resource is 200.101.0.9/255.255.255.255
Web redirect address for unauthencated users is <http://200.101.0.9:8080>
Rcvd 0 force log-off packets
Rcvd 19 force accounting update packets
Using version two private packet
16.23 show ip dhcp snooping
Command:
show ip dhcp snooping [interface [ethernet] <interfaceName>]
Function:
Display the current cofiguration information of dhcp snooping or display the records of defense
actions of a specific port.
Parameters:
<interfaceName>: The name of the specific port.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
If there is no specific port, then display the current cofiguration information of dhcp snooping,
otherwise, display the records of defense actions of the specific port.
Example:
switch#show ip dhcp snooping
DHCP Snooping is enabled
DHCP Snooping binding arp: disabled