PLANET WGSW-50040 - Manual (Page 289)

Commands for Security Function Chapter 6 Commands for TACACS+
Example:
Enable IGMP Snooping for VLAN 100 in Global Mode.
Switch(config)#ip igmp snooping vlan 100
18.2.6 ip igmp snooping vlan immediate-leave
Command:
ip igmp snooping vlan <vlan-id> immediate-leave
no ip igmp snooping vlan <vlan-id> immediate-leave
Function:
Enable the IGMP fast leave function for the specified VLAN; the “no ip igmp snooping vlan
<vlan-id> immediate-leave” command disables the IGMP fast leave function.
Parameter:
<vlan-id> is the VLAN number specified.
Command Mode:
Global Mode
Default:
This function is disabled by default.
Usage Guide:
Enable immediate-leave function of the IGMP Snooping in specified VLAN; the“no” form of this
command disables the immediate-leave function of the IGMP Snooping.
Example:
Enable the IGMP fast leave function for VLAN 100.
Switch(config)# ip igmp snooping vlan 100 immediate-leave
18.2.7 ip igmp snooping vlan l2-general-querier
Command:
ip igmp snooping vlan < vlan-id > l2-general-querier
no ip igmp snooping vlan < vlan-id > l2-general-querier
Function:
Set this VLAN to layer 2 general querier.
Parameter:
vlan-id: is ID number of the VLAN, ranging between <1-4094>.
Command Mode:
Global Mode