6 show debugging, 7 show flash, Show debugging – PLANET WGSW-50040 User Manual
Page 421: Show flash

32.6 show debugging
Command:
show debugging {l4 | l4drv | nsm | other | spanning-tree}
Function:
Display the debug switch status.
Usage Guide:
If the user needs to check what debug switches have been enabled, show debugging command
can be executed.
Command mode:
Admin Mode
Example:
Check for currently enabled debug switch.
Switch#show debugging nsm
NSM debugging status
Relative command:
Debug
32.7 show flash
Command:
show flash
Function:
Show the size of the files which are reserved in the system flash memory.
Command Mode:
Admin Mode and Configuration Mode.
Example:
To list the files and their size in the flash.
Switch#show flash
boot.rom 329,828 1900-01-01 00:00:00 --SH
boot.conf 94 1900-01-01 00:00:00 --SH
nos.img 2,449,496 1980-01-01 00:01:06 ----
startup-config 2,064 1980-01-01 00:30:12 ----