PLANET WGSW-50040 - Manual (Page 337)

Commands for Security Function Chapter 6 Commands for TACACS+
Displayed information Explanation
interface name: Ethernet 1/1 Tying situation on port Ethernet1/1
IP Ingress access-list used is 100 No. 100 numeric expansion ACL tied to entrance of port
Ethernet1/1
packet(s) number is 11110 Number of packets matching this ACL rule
21.25 show firewall
Command:
show firewall
Functions:
Reveal configuration information of packet filtering functions.
Command Mode:
Admin and Configuration Mode.
Examples:
Switch#show firewall
Firewall status: Enable.
Firewall default rule: Permit
Displayed information Explanation
fire wall is enable Packet filtering function enabled
the default action of firewall is permit Default packet filtering function is permit
21.26 show ipv6 access-lists
Command:
show ipv6 access-lists [<num>|<acl-name>]
Function:
Show the configured IPv6 access control list.
Parameter:
<num> is the number of specific access control list, the valid range is 500～699,amongst 500～599
is digit standard IPv6 ACL number,600～699 is the digit extended IPv6 ACL number;
<acl-name> is the nomenclature character string of a specific access control list, lengthening within
1～16.