PLANET WGSW-50040 - Manual (Page 285)

Commands for Security Function Chapter 6 Commands for TACACS+
Command:
show ip multicast policy
Function:
Display multicast policy of configuration
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays multicast policy of configuration
Example:
Switch#show ip multicast policy
18.1.13 show ip multicast source-control
Command:
show ip multicast source-control [detail]
show ip multicast source-control interface <Interfacename> [detail]
Function:
Display multicast source control configuration
Parameter:
detail: expresses if it displays information in detail.
<Interfacename>: interface name, such as Ethernet 1/1 or ethernet1/1.
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays multicast source control rules of configuration, including detail option, and
access-list information applied in detail.
Example:
Switch#show ip multicast source-control detail
ip multicast source-control is enabled
Interface Ethernet1/13 use multicast source control access-list 5000
access-list 5000 permit ip 10.1.1.0 0.0.0.255 232.0.0.0 0.0.0.255
access-list 5000 deny ip 10.1.1.0 0.0.0.255 233.0.0.0 0.255.255.255