PLANET WGSW-50040 - Manual (Page 71)

Command:
ftp-server timeout <seconds>
Function:
Set data connection idle time.
Parameter:
<seconds> is the idle time threshold (in seconds) for FTP connection, the valid range is 5 to 3600.
Default:
The system default is 600 seconds.
Command mode:
Global Mode
Usage Guide:
When FTP data connection idle time exceeds this limit, the FTP management connection will be
disconnected.
Example:
Modify the idle threshold to 100 seconds.
Switch#config
Switch(config)#ftp-server timeout 100
1.5.6 ip ftp
Command:
ip ftp username <username> password [0 | 7] <password>
no ip ftp username <username>
Function:
Configure the username and password for logging in to the FTP; the no operation of this command
will delete the configured username and password simultaneously.
Parameters:
<username> is the username of the FTP link, no longer than 16 characters;
0 | 7 represent displaying the password in ciphertext or plaintext;
<password> is the password of the FTP link, no longer than 16 characters.
Default Settings:
the system uses anonymous FTP links by default.
Command Mode:
Global Configuration Mode.
Examples:
Configure the username as Switch and the password as superuser.