PLANET WGSW-50040 - Manual (Page 327)

Commands for Security Function Chapter 6 Commands for TACACS+
2． When binding four ACLs and data packet matching the multi ACLs simultaneity, the priority
from high to low are shown as below,
Ingress IPv6 ACL
Ingress MAC-IP ACL
Ingress MAC ACL;
Ingress IP ACL;
Example:
Binding AAA access-list to entry direction of port.
Switch(Config-If-Ethernet1/5)#ip access-group aaa in
21.16 mac access extended
Command:
mac-access-list extended <name>
no mac-access-list extended <name>
Functions:
Define a name-manner MAC ACL or enter access-list configuration mode, “no mac-access-list
extended <name>” command deletes this ACL.
Parameters:
<name> name of access-list excluding blank or quotation mark, and it must start with letter, and the
length cannot exceed 16 (remark: sensitivity on capital or small letter.)
Command Mode:
Global mode
Default Configuration:
No access-lists configured.
Usage Guide:
After assigning this commands for the first time, only an empty name access-list is created and no
list item included.
Examples:
Create an MAC ACL named mac_acl.
Switch(config)# mac-access-list extended mac_acl
Switch(Config-Mac-Ext-Nacl-mac_acl)#