INFICON IC/5 Thin Film Deposition Controller - Manual (Page 139)

6 - 19
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
6.8 Floppy Disk
Parameters can be saved to and retrieved from the diskette by going to the
FLOPPY DISK display. This screen is reached by going from the PROGRAM
display to the I/O display (F3) to the FLOPPY DISK display (F4). For more
information on the Floppy Disk option refer to
section 3.6.8 on page 3-39 .
Upon entering this display a directory of all the IC/5 configuration files contained on
the diskette is displayed and the following key selections are available. The box
cursor can be positioned around any of the Configuration Files by moving the
cursor arrows. Left and Right correspond to Page Up and Page Down. The Up and
Down arrows will move the box cursor one position.
Figure 6-7 Floppy Disk