INFICON IC/5 Thin Film Deposition Controller - Manual (Page 188)

7 - 46
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
'<<<<<<<<<< READ RESPONSE >>>>>>>>>>
'<<<<<<<<<< WAIT FOR MESSAGE AVAILABLE BIT >>>>>>>>>>
WAITMAV:
CALL IBRSP (bd1%, SPR%)
B = SPR%/16
B = INT(B)
IF B = 1 THEN GOTO RESPONSE ELSE GOTO WAITMAV
RESPONSE:
After sending a command to the IC/5 the status byte is polled. The response to the
command is retrieved only after the MAV bit is set (2^4 = 16).