INFICON IC/5 Thin Film Deposition Controller - Manual (Page 96)

4 - 2
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
Figure 4-2 Material Directory
A previously defined material can be deleted provided it is not referenced in any
process. Place the cursor at the material to be deleted and select the DELETE
MATERIAL (F1) panel in the Material Directory. The Material Directory will be
compressed to eliminate any gaps and Process definitions will be updated to reflect
any directory number changes.
CAUTION
Logic statements will not be updated to reflect Material
Directory number changes after deleting a material.
The Material Library (see Figure 4-3 ) provides an alphabetic list of materials by
chemical name along with their density and Z-ratio. A custom USER material may
also be selected. Once a material is selected from the library listing, press the
Define Material (F5) function key to enter the material parameter series of displays.
You can move among and through the materials by using the cursor and panel
keys, as shown in the following tables and illustrations.
Figure 4-3 Material Library