INFICON IC/5 Thin Film Deposition Controller - Manual (Page 56)

3 - 4
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
8 8 Relay x 14 Output I/O Card (optional)
Provides pin connection for 8 relays rated for 30 V(dc) or 30 V(ac) RMS or
42 V(peak) maximum, and 14 open collector type outputs.
9 6-Channel DAC (standard)
Provides source control voltage or recorder output for 6 channels (BNC
connectors). Outputs are programmable for Source Control or Recorder
Voltage.
10 24-Volt Supply (standard)
Provides one 24 V(dc) supply rated at 1.75 Amps.
11 Fan Outlet
Exhaust opening for the unit’s miniature fan. A grill is attached for safety.
12 AC Power Inlet
Provides a common connector for various international plug sets. The unit is
factory set for 100 V(ac), 120 V(ac), 230 V(ac) or 240 V(ac) service.
13 RS-232C Remote Communication Connector (standard)
Provides a 9-pin RS-232C communications port.