Declaration of conformity – INFICON IC/5 Thin Film Deposition Controller User Manual
Page 5
DECLARATION
OF
CONFORMITY
This is to certify that this equipment, designed and manufactured by:
INFICON Inc.
2 Technology Place
East Syracuse, NY 13057
USA
meets the essential safety requirements of the European Union and is placed on the
market accordingly. It has been constructed in accordance with good engineering
practice in safety matters in force in the Community and does not endanger the safety
of persons, domestic animals or property when properly installed and maintained and
used in applications for which it was made.
Equipment Description:
IC/5 Thin Film Deposition Controllers, including
Oscillators and Crystal Sensors as properly installed.
Applicable Directives:
73/23/EEC as amended by 93/68/EEC
89/336/EEC as amended by 93/68/EEC
Applicable Standards:
EN 61010-1 : 1993
EN 55011, Group 1, Class A : 1991
EN 50082-1 : 1992
CE Implementation Date:
January 2, 1996
Authorized Representative:
Gary W. Lewis
Vice President - Quality Assurance
INFICON Inc.
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE
DIRECTED, IN WRITING, TO THE QUALITY ASSURANCE DEPARTMENT AT THE ABOVE ADDRESS.
01/16/96