INFICON IC/5 Thin Film Deposition Controller - Manual (Page 159)

7 - 17
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
7.7.3.6 Query Output Types
For each command format the symbol
þ
represents a blank space.
The format is:
QT
þ
output#
This command returns the type code for a specific relay. Type code values returned
are 0 or 1, where 0 is Normally Open, 1 is Normally Closed.
7.7.3.7 Query Logic Statements
For each command format the symbol
þ
represents a blank space.
The format is:
QL
þ
logic statement#
This command returns the encoded conditional string assigned to a specific logic
‘statement’. The string is represented in the form IF (event string) THEN (action
string). Applicable codes and event names can be found with the descriptions for
Update commands UL that follow. Multiple events are connected with AND, OR or
ON. Parentheses show groupings. The symbol ~ is used to represent a negate.
Certain events have a numeric qualifier. Event and Action descriptions can be
found in
Chapter 6, I/O Logic Statement Set-Up .
7.7.3.8 Query Output Name
For each command format the symbol
þ
represents a blank space.
The format is:
QO
þ
output#
This command returns the alphanumeric name assigned to the designated output
number.
7.7.3.9 Query Input Name
For each command format the symbol
þ
represents a blank space.
The format is:
QI
þ
input#
This command returns the alphanumeric name assigned to the designated input
number.
7.7.3.10 Query User Messages
For each command format the symbol
þ
represents a blank space.
The format is:
QN
þ
user message#
This command returns the user defined alphanumeric name assigned to the
designated message number.