6 hand-held controller – INFICON IC/5 Thin Film Deposition Controller User Manual
Page 90
3 - 38
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
3.6.6 Hand-Held Controller
A Hand-Held Controller, see
, is provided as an accessory with the IC/5.
The Controller serves as a wired remote to manually control power, switch crystals
and produce a STOP.
The Controller is attached to the instrument with a modular plug to the front panel.
Power is affected (only when in Manual mode) by moving the POWER/STOP
switch laterally. A STOP is produced by moving the POWER/STOP switch down
(only when in Manual mode). When in a READY, IDLE, or STOP state and the
instrument is on the SENSORS display, a crystal switch is activated by pressing the
red button on the body of the controller.
The ship kit includes a convenience hook for the Controller that can be attached to
the instrument’s mounting ears or some other accessible location.
Figure 3-17 Hand-Held Controller