9 error messages in i/o logic statement set-up – INFICON IC/5 Thin Film Deposition Controller User Manual
Page 141
6 - 21
IP
N 07
4-
23
7A
E
IC/5 Operating Manual
6.9 Error Messages in I/O
Logic Statement Set-Up
CANNOT TOGGLE INPUT
Output types can be toggled between Normally Open and Normally Closed. An
Input does not have a type function and cannot be toggled.
EDIT IN PROGRESS
The I/O Map or the User Messages display cannot be exited while an edit name
or edit message operation is occurring.
ILLEGAL INPUT - VALUE TO LARGE
ILLEGAL INPUT - VALUE TOO SMALL
Parameter entry is out of range. Allowable values will vary according to your
unit configuration or the parameter being defined. Press Clear to delete the
value and enter again.
INPUT IN USE
The input line in question has already been reserved for use.
INVALID EQUATION
Strings must have connectors and required numerics before exiting the Logic
Statement
MAXIMUM TERMS
No more than five terms are allowed in any one Event or Action string.
MUST EDIT NAME FIRST
A save name or save message operation was requested without first having
edited the name or message.
OUTPUT IN USE
Indicates the output in question is already reserved for use in Sensor or Source
set-up or in one of the Logic Statements.