Document Outline

• Chapter 1 Commands for Basic Switch Configuration
  • 1.1 Commands for Basic Configuration
    • 1.1.1 Authentication line
    • 1.1.2 clock set
    • 1.1.3 config
    • 1.1.4 debug ssh-server
    • 1.1.5 enable
    • 1.1.6 enable password
    • 1.1.7 exec-timeout
    • 1.1.8 end
    • 1.1.9 exit
    • 1.1.10 help
    • 1.1.11 hostname
    • 1.1.12 ip host
    • 1.1.13 ipv6 host
    • 1.1.14 ip http server
    • 1.1.15 language
    • 1.1.16 login
    • 1.1.17 password
    • 1.1.18 reload
    • 1.1.19 service password-encryption
    • 1.1.20 service terminal-length
    • 1.1.21 sysContact
    • 1.1.22 sysLocation
    • 1.1.23 set default
    • 1.1.24 setup
    • 1.1.25 show clock
    • 1.1.26 show temperature
    • 1.1.27 show tech-support
    • 1.1.28 show version
    • 1.1.29 username
    • 1.1.30 web language
    • 1.1.31 write
  • 1.2 Commands for Telnet
    • 1.2.1 authentication ip access-class
    • 1.2.2 authentication ipv6 access-class
    • 1.2.3 authentication line login
    • 1.2.4 authentication securityip
    • 1.2.5 authentication securityipv6
    • 1.2.6 authentication
    • 1.2.7 terminal length
    • 1.2.8 terminal monitor
    • 1.2.9 telnet
    • 1.2.10 telnet server enable
    • 1.2.11 telnet-server max-connection
    • 1.2.12 ssh-server authentication-retries
    • 1.2.13 ssh-server enable
    • 1.2.14 ssh-server host-key create rsa
    • 1.2.15 ssh-server max-connection
    • 1.2.16 ssh-server timeout
    • 1.2.17 show ssh-server
    • 1.2.18 show telnet login
  • 1.3 Commands for Configuring Switch IP
    • 1.3.1 interface vlan
    • 1.3.2 ip address
    • 1.3.3 ipv6 address
    • 1.3.4 ip bootp-client enable
    • 1.3.5 ip dhcp-client enable
  • 1.4 Commands for SNMP
    • 1.4.1 debug snmp mib
    • 1.4.2 debug snmp kernel
    • 1.4.3 rmon enable
    • 1.4.4 show snmp
    • 1.4.5 show snmp engineid
    • 1.4.6 show snmp group
    • 1.4.7 show snmp mib
    • 1.4.8 show snmp status
    • 1.4.9 show snmp user
    • 1.4.10 show snmp view
    • 1.4.11 snmp-server community
    • 1.4.12 snmp-server enable
    • 1.4.13 snmp-server enable traps
    • 1.4.14 snmp-server engineid
    • 1.4.15 snmp-server group
    • 1.4.16 snmp-server host
    • 1.4.17 snmp-server securityip
    • 1.4.18 snmp-server securityip
    • 1.4.19 snmp-server view
    • 1.4.20 snmp-server user
  • 1.5 Commands for Switch Upgrade
    • 1.5.1 copy（FTP）
    • 1.5.2 copy（TFTP）
    • 1.5.3 ftp-dir
    • 1.5.4 ftp-server enable
    • 1.5.5 ftp-server timeout
    • 1.5.6 ip ftp
    • 1.5.7 show ftp
    • 1.5.8 show tftp
    • 1.5.9 tftp-server enable
    • 1.5.10 tftp-server retransmission-number
    • 1.5.11 tftp-server transmission-timeout
• Chapter 2 Commands for Cluster
  • 2.1 clear cluster nodes
  • 2.2 cluster auto-add
  • 2.3 cluster commander
  • 2.4 cluster ip-pool
  • 2.5 cluster keepalive interval
  • 2.6 cluster keepalive loss-count
  • 2.7 cluster member
  • 2.8 cluster member auto-to-user
  • 2.9 cluster reset member
  • 2.10 cluster run
  • 2.11 cluster update member
  • 2.12 debug cluster
  • 2.13 debug cluster packets
  • 2.14 show cluster
  • 2.15 show cluster members
  • 2.16 show cluster candidates
  • 2.17 show cluster topology
  • 2.18 rcommand commander
  • 2.19 rcommand member
• Chapter 3 Commands for Network Port Configuration
  • 3.1 Commands for Ethernet Port Configuration
    • 3.1.1 bandwidth
    • 3.1.2 combo-forced-mode
    • 3.1.3 clear counters interface
    • 3.1.4 flow control
    • 3.1.5 interface ethernet
    • 3.1.6 loopback
    • 3.1.7 mdi
    • 3.1.8 name
    • 3.1.9 negotiation
    • 3.1.10 port-scan-mode
    • 3.1.11 rate-suppression
    • 3.1.12 rate-violation
    • 3.1.13 show interface
    • 3.1.14 shutdown
    • 3.1.15 speed-duplex
• Chapter 4 Commands for Port Loopback Detection Function
  • 4.1 loopback-detection control
  • 4.2 loopback-detection specified-vlan
  • 4.3 loopback-detection interval-time
  • 4.4 loopback-detection control-recovery timeout
  • 4.5 show loopback-detection
  • 4.6 debug loopback-detection
• Chapter 5 Commands for Port Channel
  • 5.1 debug lacp
  • 5.2 interface port-channel
  • 5.3 port-group
  • 5.4 port-group mode
  • 5.5 show port-group
• Chapter 6 Commands for Jumbo
  • 6.1 jumbo enable
• Chapter 7 VLAN Configuration
  • 7.1 Commands for VLAN Configuration
    • 7.1.1 debug gvrp
    • 7.1.2 dot1q-tunnel enable
    • 7.1.3 dot1q-tunnel tpid
    • 7.1.4 gvrp
    • 7.1.5 garp timer hold
    • 7.1.6 garp timer join
    • 7.1.7 garp timer leave
    • 7.1.8 garp timer leaveall
    • 7.1.9 name
    • 7.1.10 private-vlan
    • 7.1.11 private-vlan association
    • 7.1.12 show dot1q-tunnel
    • 7.1.13 show garp
    • 7.1.14 show gvrp
    • 7.1.15 show vlan
    • 7.1.16 switchport access vlan
    • 7.1.17 switchport interface
    • 7.1.18 switchport mode
    • 7.1.19 switchport trunk allowed vlan
    • 7.1.20 switchport trunk native vlan
    • 7.1.21 vlan
    • 7.1.22 vlan ingress enable
  • 7.2 Commands for Dynamic VLAN Configuration
    • 7.2.1 dynamic-vlan mac-vlan prefer
    • 7.2.2 dynamic-vlan subnet-vlan prefer
    • 7.2.3 mac-vlan
    • 7.2.4 mac-vlan vlan
    • 7.2.5 protocol-vlan
    • 7.2.6 show dynamic-vlan prefer
    • 7.2.7 show mac-vlan
    • 7.2.8 show mac-vlan interface
    • 7.2.9 show protocol-vlan
    • 7.2.10 show subnet-vlan
    • 7.2.11 show subnet-vlan interface
    • 7.2.12 subnet-vlan
    • 7.2.13 switchport mac-vlan enable
    • 7.2.14 switchport subnet-vlan enable
  • 7.3 Commands for Voice VLAN Configuration
    • 7.3.1 show voice-vlan
    • 7.3.2 switchport voice-vlan enable
    • 7.3.3 voice-vlan
    • 7.3.4 voice-vlan vlan
• Chapter 8 Commands for MAC Address Table Configuration
  • 8.1 Commands for MAC Address Table Configuration
    • 8.1.1 mac-address-table aging-time
    • 8.1.2 mac-address-table static|blackhole
    • 8.1.3 show mac-address-table
  • 8.2 Commands for Mac Address Binding configuration
    • 8.2.1 clear port-security dynamic
    • 8.2.2 show port-security
    • 8.2.3 show port-security address
    • 8.2.4 show port-security interface
    • 8.2.5 switchport port-security
    • 8.2.6 switchport port-security convert
    • 8.2.7 switchport port-security lock
    • 8.2.8 switchport port-security mac-address
    • 8.2.9 switchport port-security maximum
    • 8.2.10 switchport port-security timeout
    • 8.2.11 switchport port-security violation
• Chapter 9 Commands for MSTP
  • 9.1 Commands for MSTP
    • 9.1.1 abort
    • 9.1.2 exit
    • 9.1.3 instance vlan
    • 9.1.4 name
    • 9.1.5 revision-level
    • 9.1.6 spanning-tree
    • 9.1.7 spanning-tree forward-time
    • 9.1.8 spanning-tree hello-time
    • 9.1.9 spanning-tree link-type p2p
    • 9.1.10 spanning-tree maxage
    • 9.1.11 spanning-tree max-hop
    • 9.1.12 spanning-tree mcheck
    • 9.1.13 spanning-tree mode
    • 9.1.14 spanning-tree mst configuration
    • 9.1.15 spanning-tree mst cost
    • 9.1.16 spanning-tree mst port-priority
    • 9.1.17 spanning-tree mst priority
    • 9.1.18 spanning-tree mst rootguard
    • 9.1.19 spanning-tree portfast
    • 9.1.20 spanning-tree priority
    • 9.1.21 spanning-tree format
    • 9.1.22 spanning-tree digest-snooping
    • 9.1.23 spanning-tree tcflush (Global mode)
    • 9.1.24 spanning-tree tcflush (Port mode)
  • 9.2 Commands for Monitor and Debug
    • 9.2.1 show spanning-tree
    • 9.2.2 show spanning-tree mst config
    • 9.2.3 show mst-pending
    • 9.2.4 debug spanning-tree
• Chapter 10 Commands for QoS
  • 10.1 accounting
  • 10.2 class
  • 10.3 class-map
  • 10.4 class mls qos statistics
  • 10.5 match
  • 10.6 mls qos cos
  • 10.7 mls qos map
  • 10.8 mls qos queue algorithm
  • 10.9 mls qos queue wrr weight
  • 10.10 mls qos queue wdrr weight
  • 10.11 mls qos queue bandwidth
  • 10.12 mls qos trust
  • 10.13 policy
  • 10.14 policy aggregate
  • 10.15 policy-map
  • 10.16 set
  • 10.17 service-policy input
  • 10.18 service-policy input vlan
  • 10.19 show class-map
  • 10.20 show policy-map
  • 10.21 show mls qos interface
  • 10.22 show mls qos maps
  • 10.23 show mls qos vlan
• Chapter 11 Commands for Flow-based Redirection
  • 11.1 access-group redirect to interface ethernet
  • 11.2 show flow-based-redirect
• Chapter 12 Commands for Layer 3 Forwarding
  • 12.1 Commands for Layer 3 Interface
    • 12.1.1 interface vlan
    • 12.1.2 ip address
    • 12.1.3 ip default-gatway
    • 12.1.4 debug ip packet
    • 12.1.5 show ip traffic
    • 12.1.6 show ip route
  • 12.2 Commands for IPv6 configuration
    • 12.2.1 clear ipv6 neighbor
    • 12.2.2 debug ipv6 packet
    • 12.2.3 debug ipv6 icmp
    • 12.2.4 debug ipv6 nd
    • 12.2.5 ipv6 default-gateway
    • 12.2.6 ipv6 address
    • 12.2.7 ipv6 redirect
    • 12.2.8 ipv6 nd dad attempts
    • 12.2.9 ipv6 nd ns-interval
    • 12.2.10 ipv6 nd suppress-ra
    • 12.2.11 ipv6 nd ra-lifetime
    • 12.2.12 ipv6 nd min-ra-interval
    • 12.2.13 ipv6 nd max-ra-interval
    • 12.2.14 ipv6 nd prefix
    • 12.2.15 ipv6 neighbor
    • 12.2.16 show ipv6 interface
    • 12.2.17 show ipv6 route
    • 12.2.18 show ipv6 neighbors
    • 12.2.19 show ipv6 traffic
    • 12.2.20 show ipv6 enable
    • 12.2.21 show ipv6 redirect
  • 12.3 Commands for ARP Configuration
    • 12.3.1 arp
    • 12.3.2 clear arp-cache
    • 12.3.3 debug arp
    • 12.3.4 show arp
    • 12.3.5 show arp traffic
• Chapter 13 Commands for ARP Scanning Prevention
  • 13.1 anti-arpscan enable
  • 13.2 anti-arpscan port-based threshold
  • 13.3 anti-arpscan ip-based threshold
  • 13.4 anti-arpscan trust
  • 13.5 anti-arpscan trust ip
  • 13.6 anti-arpscan recovery enable
  • 13.7 anti-arpscan recovery time
  • 13.8 anti-arpscan log enable
  • 13.9 anti-arpscan trap enable
  • 13.10 show anti-arpscan
  • 13.11 debug anti-arpscan
• Chapter 14 Command for ARP GUARD
  • 14.1 arp-guard ip
• Chapter 15 Commands for DHCP
  • 15.1 Commands for DHCP Server Configuration
    • 15.1.1 bootfile
    • 15.1.2 clear ip dhcp binding
    • 15.1.3 clear ip dhcp conflict
    • 15.1.4 clear ip dhcp server statistics
    • 15.1.5 client-identifier
    • 15.1.6 debug ip dhcp server
    • 15.1.7 default-router
    • 15.1.8 dns-server
    • 15.1.9 domain-name
    • 15.1.10 hardware-address
    • 15.1.11 host
    • 15.1.12 ip dhcp conflict logging
    • 15.1.13 ip dhcp excluded-address
    • 15.1.14 ip dhcp pool
    • 15.1.15 ip dhcp conflict ping-detection enable
    • 15.1.16 ip dhcp ping packets
    • 15.1.17 ip dhcp ping timeout
    • 15.1.18 lease
    • 15.1.19 netbios-name-server
    • 15.1.20 netbios-node-type
    • 15.1.21 network-address
    • 15.1.22 next-server
    • 15.1.23 option
    • 15.1.24 service dhcp
    • 15.1.25 show ip dhcp binding
    • 15.1.26 show ip dhcp conflict
    • 15.1.27 show ip dhcp server statistics
• Chapter 16 Commands for DHCP Snooping
  • 16.1 debug ip dhcp snooping packet interface
  • 16.2 debug ip dhcp snooping packet
  • 16.3 debug ip dhcp snooping update
  • 16.4 debug ip dhcp snooping event
  • 16.5 debug ip dhcp snooping binding
  • 16.6 ip dhcp snooping
  • 16.7 ip dhcp snooping binding
  • 16.8 ip dhcp snooping binding user
  • 16.9 ip dhcp snooping binding arp
  • 16.10 ip dhcp snooping binding dot1x
  • 16.11 ip dhcp snooping binding user-control
  • 16.12 ip dhcp snooping binding user-control max-user
  • 16.13 ip dhcp snooping trust
  • 16.14 ip dhcp snooping action
  • 16.15 ip dhcp snooping action MaxNum
  • 16.16 ip dhcp snooping limit-rate
  • 16.17 ip dhcp snooping information enable
  • 16.18 ip dhcp snooping option82 enable
  • 16.19 enable trustview key
  • 16.20 ip user private packet version two
  • 16.21 ip user helper-address
  • 16.22 show trustview status
  • 16.23 show ip dhcp snooping
  • 16.24 show ip dhcp snooping binding all
• Chapter 17 Commands for DHCP Snooping option 82
  • 17.1 ip dhcp snooping information enable
• Chapter 18 IPv4 Multicast Protocol
  • 18.1 Commands for DCSCM
    • 18.1.1 access-list (Multicast Destination Control)
    • 18.1.2 access-list (Multicast Source Control)
    • 18.1.3 ip multicast destination-control access-group
    • 18.1.4 ip multicast destination-control access-group (sip)
    • 18.1.5 ip multicast destination-control access-group (vmac)
    • 18.1.6 ip multicast policy
    • 18.1.7 ip multicast source-control
    • 18.1.8 ip multicast source-control access-group
    • 18.1.9 multicast destination-control
    • 18.1.10 show ip multicast destination-control
    • 18.1.11 show ip multicast destination-control access-list
    • 18.1.12 show ip multicast policy
    • 18.1.13 show ip multicast source-control
    • 18.1.14 show ip multicast source-control access-list
  • 18.2 Commands for IGMP Snooping
    • 18.2.1 clear ip igmp snooping vlan
    • 18.2.2 clear ip igmp snooping vlan <1-4094> mrouter-port
    • 18.2.3 debug igmp snooping all/packet/event/timer/mfc
    • 18.2.4 ip igmp snooping
    • 18.2.5 ip igmp snooping vlan
    • 18.2.6 ip igmp snooping vlan immediate-leave
    • 18.2.7 ip igmp snooping vlan l2-general-querier
    • 18.2.8 ip igmp snooping vlan l2-general-querier-source
    • 18.2.9 ip igmp snooping vlan l2-general-querier-version
    • 18.2.10 ip igmp snooping vlan limit
    • 18.2.11 ip igmp snooping vlan mrouter-port interface
    • 18.2.12 ip igmp snooping vlan mrpt
    • 18.2.13 ip igmp snooping vlan query-interval
    • 18.2.14 ip igmp snooping vlan query-mrsp
    • 18.2.15 ip igmp snooping vlan query-robustness
    • 18.2.16 ip igmp snooping vlan report source-address
    • 18.2.17 ip igmp snooping vlan static-group
    • 18.2.18 ip igmp snooping vlan suppression-query-time
    • 18.2.19 show ip igmp snooping
• Chapter 19 IPv6 Multicast Protocol
  • 19.1 Commands for MLD Snooping Configuration
    • 19.1.1 clear ipv6 mld snooping vlan
    • 19.1.2 clear ipv6 mld snooping vlan <1-4094> mrouter-port
    • 19.1.3 debug mld snooping all/packet/event/timer/mfc
    • 19.1.4 ipv6 mld snooping
    • 19.1.5 ipv6 mld snooping vlan
    • 19.1.6 ipv6 mld snooping vlan immediate-leave
    • 19.1.7 ipv6 mld snooping vlan l2-general-querier
    • 19.1.8 ipv6 mld snooping vlan limit
    • 19.1.9 ipv6 mld snooping vlan mrouter-port interface
    • 19.1.10 ipv6 mld snooping vlan mrpt
    • 19.1.11 ipv6 mld snooping vlan query-interval
    • 19.1.12 ipv6 mld snooping vlan query-mrsp
    • 19.1.13 ipv6 mld snooping vlan query-robustness
    • 19.1.14 ipv6 mld snooping vlan static-group
    • 19.1.15 ipv6 mld snooping vlan static-group
    • 19.1.16 show ipv6 mld snooping
• Chapter 20 Commands for Multicast VLAN
  • 20.1 multicast-vlan
  • 20.2 multicast-vlan association
• Chapter 21 Commands for ACL
  • 21.1 absolute-periodic/periodic
  • 21.2 absolute start
  • 21.3 access-list (ip extended)
  • 21.4 access-list (ip standard)
  • 21.5 access-list(mac extended)
  • 21.6 access-list(mac-ip extended)
  • 21.7 access-list(mac standard)
  • 21.8 clear access-group statistic interface
  • 21.9 firewall
  • 21.10 firewall default
  • 21.11 ip access extended
  • 21.12 ip access standard
  • 21.13 ipv6 access-list
  • 21.14 ipv6 access standard
  • 21.15 {ip|ipv6|mac|mac-ip} access-group
  • 21.16 mac access extended
  • 21.17 mac-ip access extended
  • 21.18 permit | deny (ip extended)
  • 21.19 permit | deny(ip standard)
  • 21.20 permit | deny(ipv6 standard)
  • 21.21 permit | deny(mac extended)
  • 21.22 permit | deny(mac-ip extended)
  • 21.23 show access-lists
  • 21.24 show access-group
  • 21.25 show firewall
  • 21.26 show ipv6 access-lists
  • 21.27 show time-range
  • 21.28 time-range
• Chapter 22 Commands for 802.1x
  • 22.1 debug dot1x detail
  • 22.2 debug dot1x error
  • 22.3 debug dot1x fsm
  • 22.4 debug dot1x packet
  • 22.5 dot1x accept-mac
  • 22.6 dot1x eapor enable
  • 22.7 dot1x enable
  • 22.8 dot1x ipv6 passthrough
  • 22.9 dot1x guest-vlan
  • 22.10 dot1x macfilter enable
  • 22.11 dot1x max-req
  • 22.12 dot1x user free-resource
  • 22.13 dot1x max-user macbased
  • 22.14 dot1x max-user userbased
  • 22.15 dot1x port-control
  • 22.16 dot1x port-method
  • 22.17 dot1x privateclient enable
  • 22.18 dot1x re-authenticate
  • 22.19 dot1x re-authentication
  • 22.20 dot1x timeout quiet-period
  • 22.21 dot1x timeout re-authperiod
  • 22.22 dot1x timeout tx-period
  • 22.23 dot1x unicast enable
  • 22.24 dot1x web authentication enable
  • 22.25 dot1x web authentication ipv6 passthrough
  • 22.26 dot1x web redirect
  • 22.27 dot1x web redirect enable
  • 22.28 show dot1x
• Chapter 23 Commands for the Number Limitation Function of Port, MAC in VLAN and IP
  • 23.1 switchport mac-address dynamic maximum
  • 23.2 vlan mac-address dynamic maximum
  • 23.3 mac-address query timeout
  • 23.4 show mac-address dynamic count
  • 23.5 debug switchport mac count
  • 23.6 debug vlan mac count
• Chapter 24 Commands for AM Configuration
  • 24.1 am enable
  • 24.2 am port
  • 24.3 am ip-pool
  • 24.4 am mac-ip-pool
  • 24.5 no am all
  • 24.6 show am
• Chapter 25 Commands for Security Feature
  • 25.1 dosattack-check srcip-equal-dstip enable
  • 25.2 dosattack-check ipv4-first-fragment enable
  • 25.3 dosattack-check tcp-flags enable
  • 25.4 dosattack-check srcport-equal-dstport enable
  • 25.5 dosattack-check tcp-fragment enable
  • 25.6 dosattack-check tcp-segment
  • 25.7 dosattack-check icmp-attacking enable
  • 25.8 dosattack-check icmpv4-size
  • 25.9 dosattack-check icmpv6-size
• Chapter 26 Commands for TACACS+
  • 26.1 tacacs-server authentication host
  • 26.2 tacacs-server key
  • 26.3 tacacs-server nas-ipv4
  • 26.4 tacacs-server timeout
  • 26.5 debug tacacs-server
• Chapter 27 Commands for RADIUS
  • 27.1 aaa enable
  • 27.2 aaa-accounting enable
  • 27.3 aaa-accounting update
  • 27.4 debug aaa packet
  • 27.5 debug aaa detail attribute
  • 27.6 debug aaa detail connection
  • 27.7 debug aaa detail event
  • 27.8 debug aaa error
  • 27.9 radius nas-ipv4
  • 27.10 radius nas-ipv6
  • 27.11 radius-server accounting host
  • 27.12 radius-server authentication host
  • 27.13 radius-server dead-time
  • 27.14 radius-server key
  • 27.15 radius-server retransmit
  • 27.16 radius-server timeout
  • 27.17 radius-server accounting-interim-update timeout
  • 27.18 show aaa authenticated-user
  • 27.19 show aaa authenticating-user
  • 27.20 show aaa config
  • 27.21 show radius count
• Chapter 28 Commands for MRPP
  • 28.1 control-vlan
  • 28.2 clear mrpp statistics
  • 28.3 debug mrpp
  • 28.4 enable
  • 28.5 fail-timer
  • 28.6 hello-timer
  • 28.7 mrpp enable
  • 28.8 mrpp ring
  • 28.9 mrpp ring primary-port
  • 28.10 mrpp ring secondary-port
  • 28.11 node-mode
  • 28.12 show mrpp
  • 28.13 show mrpp statistics
• Chapter 29 Commands for Mirroring Configuration
  • 29.1 monitor session source interface
  • 29.2 monitor session source interface access-list
  • 29.3 monitor session destination interface
  • 29.4 show monitor
• Chapter 30 Commands for sFlow
  • 30.1 sflow destination
  • 30.2 sflow agent-address
  • 30.3 sflow priority
  • 30.4 sflow header-len
  • 30.5 sflow data-len
  • 30.6 sflow counter-interval
  • 30.7 sflow rate
  • 30.8 show sflow
• Chapter 31 Commands for SNTP
  • 31.1 debug sntp
  • 31.2 sntp server
  • 31.3 sntp polltime
  • 31.4 sntp timezone
  • 31.5 show sntp
• Chapter 32 Commands for Show
  • 32.1 clear logging
  • 32.2 logging
  • 32.3 logging loghost sequence-number
  • 32.4 ping
  • 32.5 ping6
  • 32.6 show debugging
  • 32.7 show flash
  • 32.8 show history
  • 32.9 show logging buffered
  • 32.10 show memory
  • 32.11 show running-config
  • 32.12 show startup-config
  • 32.13 show switchport interface
  • 32.14 show tcp
  • 32.15 show telnet login
  • 32.16 show tech-support
  • 32.17 show udp
  • 32.18 show version
  • 32.19 traceroute
  • 32.20 traceroute6
• Chapter 33 Commands for Reload Switch after Specified Time
  • 33.1 reload after
  • 33.2 reload cancel
  • 33.3 show reload
• Chapter 34 Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
  • 34.1 cpu-rx-ratelimit total
  • 34.2 cpu-rx-ratelimit queue-length
  • 34.3 cpu-rx-ratelimit protocol
  • 34.4 clear cpu-rx-stat protocol
  • 34.5 show cpu-rx protocol
  • 34.6 debug driver
• EC Declaration of Conformity