Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 21)

Rockwell Automation Publication 750-PM001J-EN-P - October 2014 21
Chapter
2
Parameter Organization
This chapter lists and describes the PowerFlex 750-Series Port 0 drive parameters.
The parameters can be programmed (viewed/edited) using a Human Interface
Module (HIM). Refer to Enhanced PowerFlex 7-Class Human Interface Module
(HIM) User Manual, publication
20HIM-UM001 , for information on using the
HIM to view and edit parameters. As an alternative, programming can also be
performed using DriveTools™ software and a personal computer.
Topic Page
About Parameters 22
Parameter Access Level 23
How Drive Parameters are Organized 24
How Option Module Parameters are Organized 45