Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 250)

250 Rockwell Automation Publication 750-PM001J-EN-P - October 2014
Chapter 5 Embedded Feature and Option Module Parameters
Fil
e
Gr
ou
p
No. Display Name
Full Name
Description Values
Re
ad
-Write
Da
ta T
ype
11-S
eries I/O
Mo
to
r PT
C
41 ATEX Sts
ATEX Status RO 16-bit
Integer
This parameter is not latched and only displays the current status of the ATEX thermal sensor. When an ATEX fault is present, the corresponding bit value is 1. When
motor temperature is within the optimal range, the bit value is 0.
This parameter is available only when an ATEX option module is installed.
Bit 0 “Thrmlsnsor OK” – Thermal sensor is Ok.
Bit 1 “Short Cirkt” – Short circuit fault detected by thermal sensor.
Bit 2 “Over Temp” – Over temperature fault is detected by thermal sensor.
Bit 3 “Voltage Loss” – Voltage loss fault has taken place on ATEX board.
Bit 13 “Thermostat” – Thermostat input has been selected.
Bit 14 “PTC Selected” – PTC input has been selected.
Options
Re
se
rv
ed
PT
C Selec
ted
Th
er
m
os
ta
t
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Vo
lta
ge
L
os
s
Ov
er
Te
m
p
Shor
t C
irkt
Th
rm
ls
ns
or
O
K
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = Condition False
1 = Condition True