Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 257)

Rockwell Automation Publication 750-PM001J-EN-P - October 2014 257
Embedded Feature and Option Module Parameters Chapter 5
22-S
eries I/O
D
igi
tal
O
u
tpu
ts
6 Dig Out Invert
Digital Output Invert RW 16-bit
Integer
Inverts the selected digital output.
(1) Bit 1 = “Trans Out 0” for 22-Series I/O Module model 20-750-2263C-1R2T
= “Relay Out 1” for 22-Series I/O Module models 20-750-2262C-2R and 20-750-2262D-2R
(2) Bit 2 is only used by 22-Series I/O Module 20-750-2263C-1R2T
7 Dig Out Setpoint
Digital Output Setpoint RW 16-bit
Integer
Controls Relay or Transistor Outputs when chosen as the source. Can be used to control outputs from a communication device using DataLinks.
(1) Bit 1 = “Trans Out 0” for 22-Series I/O Module model 20-750-2263C-1R2T
= “Relay Out 1” for 22-Series I/O Module models 20-750-2262C-2R and 20-750-2262D-2R
(2) Bit 2 is only used by 22-Series I/O Module 20-750-2263C-1R2T
10 RO0 Sel
Relay Output 0 Select
Selects the source that will energize the relay output.
Any status parameter bit can be used as an output source. For example P935 [Drive
Status 1] Bit 7 “Faulted.”
For Torque Proving set to Port 0, parameter 1103 Bit 4. Use N.O. for safety. Default:
Min/Max: 0.00 (Disabled)
0.00 / 159999.15 RW 32-bit
Integer
11 RO0 Level Sel
Relay Output 0 Level Select
Selects the source of the level that will be compared. Default:
Min/Max: 0 (Disabled)
0 / 159999 RW 32-bit
Integer
12 RO0 Level
Relay Output 0 Level
Sets the level compare value. Default:
Min/Max: 0.0
–/+1000000.0 RW Real
13 RO0 Level CmpSts
Relay Output 0 Level Compare Status RO 16-bit
Integer
Status of the level compare, and a possible source for a relay or transistor output. Relay Output n Select or Transistor Output n Select must have this selected to
energize the output. Can be used without a physical output as status information only.
Bit 0 “Less Than” – Level source is less than the level value.
Bit 1 “Grt Than Equ” – Level source is greater than or equal to the level value.
Bit 2 “Abs Less Than” – Absolute value of the level source is less than the absolute value of the level value.
Bit 3 “AbsGrtThanEq” – Absolute value of the level source is greater than or equal to the absolute value of the level value.
Fi
le
Grou
p
No. Display Name
Full Name
Description Values
Re
ad
-W
ri
te
Da
ta
T
ype
Options
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Res
er
ved
Tr
an
s O
ut
1
(2)
Tr
an
s O
ut
0
(1)
Rela
y O
ut
0
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = Output Not Inverted
1 = Output Inverted
Options
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Tr
an
s O
ut
1
(2)
Tr
an
s O
ut
0
(1)
Rela
y O
ut
0
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = Output De-energized
1 = Output Energized
Options
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
Re
ser
ved
AbsG
rt
Th
anE
q
Abs L
ess
T
han
Gr
t Th
an
Eq
u
Le
ss T
han
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = Condition False
1 = Condition True