Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 84)

84 Rockwell Automation Publication 750-PM001J-EN-P - October 2014
Chapter 3 Drive Port 0 Parameters
Drive (Port 0) Cfg File
Fi
le
Grou
p
No. Display Name
Full Name
Description Values
Re
ad
-W
ri
te
Da
ta
T
ype
DR
IVE CFG
Pr
ef
er
en
ce
s
300 Speed Units
Speed Units
Selects the units to be used for all speed related parameters. This parameter is only reset
when Set Defaults “All” (not recommended) is executed. Default:
Options: Current Selection
0 = “Hz”
1 = “RPM” RW 32-bit
Integer
301 Access Level
Access Level
Sets the access level for parameters and option choices.
“Basic” (0) – Provides the smallest, simplest, and most user friendly view.
“Advanced” (1) – May be required to use advanced features.
“Expert” (2) – Not normally recommended (makes the list very long), and shows extra
parameters that should rarely be required.
When the access level is changed, PC-based tools (for example Drive Tools and Drive
Explorer) will require a reconnect.
This parameter is only reset when Set Defaults “All” (not recommended) is executed. Default:
Options: Current Selection
0 = “Basic”
1 = “Advanced”
2 = “Expert” RW 32-bit
Integer
302 Language
Language
Select display language.
This parameter is only reset when Set Defaults “All” (not recommended) is executed. Default:
Options: 0 = “Not Selected”
0 = “Not Selected”
1 = “English”
2 = “French”
3 = “Spanish”
4 = “Italian”
5 = “German”
6 = “Japanese”
7 = “Portuguese”
8 = “Chinese”
9 = “Reserved”
10 = “Reserved”
11 = “Korean” RW 32-bit
Integer