Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 54)

54 Rockwell Automation Publication 750-PM001J-EN-P - October 2014
Chapter 3 Drive Port 0 Parameters
Drive (Port 0) Motor Control
File
Fil
e
Gr
oup
No. Display Name
Full Name
Description Values
Re
ad
-Write
Da
ta
T
yp
e
MOT
O
R
CONTROL
Mo
tor D
at
a
25 Motor NP Volts
Motor Nameplate Volts
Rated volts shown on the motor nameplate. Units:
Default:
Min/Max: V AC
Based on Drive Rating and Voltage Class
0.10 / Based on Drive Rating and Voltage Class RW Real
26 Motor NP Amps
Motor Nameplate Amps
Rated full load amps shown on the motor nameplate. Units:
Default:
Min/Max: Amps
Based on Drive Rating
0.01 / 14200.00 RW Real
27 Motor NP Hertz
Motor Nameplate Hertz
Rated frequency shown on the motor nameplate. Units:
Default:
Min/Max: Hz
Based on Drive Rating
2.00 / 650.00 RW Real
28 Motor NP RPM
Motor Nameplate Revolutions Per Minute
Rated RPM shown on the motor nameplate. Units:
Default:
Min/Max: RPM
Based on Drive Rating
1.0 / 40000.0 RW Real
29 Mtr NP Pwr Units
Motor Nameplate Power Units
Power units shown on the motor nameplate. Default:
Options: Based on Drive Rating
0 – HP
1 – kW RW 32-bit
Integer
30 Motor NP Power
Motor Nameplate Power
Rated power shown on the motor nameplate. Units:
Default:
Min/Max:
HP (P29 = 0)
kW (P29 = 1)
Based on Drive Rating
0.00 / 2000.00 RW Real
31 Motor Poles
Motor Poles
Number of poles in the motor. Units:
Default:
Min/Max: Pole
4
2 / 200 RW 32-bit
Integer
120 x [Motor NP Hertz]
[Motor NP RPM]
Poles =