Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 264)

264 Rockwell Automation Publication 750-PM001J-EN-P - October 2014
Chapter 5 Embedded Feature and Option Module Parameters
22-
Se
ries I/O
An
al
og O
u
tp
u
ts
82 Anlg Out0 Val
Analog Output 0 Value
Displays the analog output value. Units:
Default:
Min/Max:
Volt
mA
10.000 Volts
20.000 mA
–/+10.000 Volts
0.000 / 20.000 mA RO Real
85 Anlg Out1 Sel
Analog Output 1 Select
Selects the source for the analog output. Default:
Min/Max: 7
0 / 159999 RW 32-bit
Integer
86 Anlg Out1 Stpt
Analog Output 1 Setpoint
A possible source for an analog output. Can be used to control an analog output from a
communication device using a DataLink. Not affected by analog output scaling. Units:
Default:
Min/Max:
Volt
mA
10.000 Volts
20.000 mA
–/+10.000 Volts
0.000 / 20.000 mA RW Real
87 Anlg Out1 Data
Analog Output 1 Data
Displays the value of the source selected by P85 [Anlg Out1 Sel]. Default:
Min/Max: 0.000
0.000 / 3200.00 RO Real
88 Anlg Out1 DataHi
Analog Output 1 Data High
Sets the high value for the data range of analog out scale. Default:
Min/Max: 1.000
0.000 / 3200.00 RW Real
89 Anlg Out1 DataLo
Analog Output 1 Data Low
Sets the low value for the data range of analog out scale. Default:
Min/Max: 0.000
0.000 / 3200.00 RW Real
90 Anlg Out1 Hi
Analog Output 1 High
Sets the high value for the analog output value when the data value is at its maximum. Units:
Default:
Min/Max:
Volt
mA
10.000 Volts
20.000 mA
–/+10.000 Volts
0.000 / 20.000 mA RW Real
91 Anlg Out1 Lo
Analog Output 1 Low
Sets the low value for the analog output value when the data value is at its minimum. Units:
Default:
Min/Max:
Volt
mA
0.000 Volts
0.000 mA
–/+10.000 Volts
0.000 / 20.000 mA RW Real
92 Anlg Out1 Val
Analog Output 1 Value
Displays the analog output value. Units:
Default:
Min/Max:
Volt
mA
10.000 Volts
20.000 mA
–/+10.000 Volts
0.000 / 20.000 mA RO Real
Fi
le
Grou
p
No. Display Name
Full Name
Description Values
Re
ad
-W
ri
te
Da
ta
T
ype