Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 78)

78 Rockwell Automation Publication 750-PM001J-EN-P - October 2014
Chapter 3 Drive Port 0 Parameters
FEEDBA
CK &
I/O
D
igi
ta
l O
u
tpu
ts
233 RO0 Level CmpSts
Relay Output 0 Level Compensation Status
RO 16-bit
Integer
Status of the level compare, and a possible source for a relay or transistor output. Relay Output n Select or Transistor Output n Select must have this selected to
energize the output. Can be used without a physical output as status information only.
Bit 0 “Less Than” – Level source is less than the level value.
Bit 1 “Grt Than Equ” – Level source is greater than or equal to the level value.
Bit 2 “Abs Less Than” – Absolute value of the level source is less than the absolute value of the level value.
Bit 3 “AbsGrtThanEq” – Absolute value of the level source is greater than or equal to the absolute value of the level value.
234 RO0 On Time
Relay Output 0 On Time
Sets the “ON Delay” time for the digital outputs. This is the time between the occurrence
of a condition and activation of the relay.
Units:
Default:
Min/Max: Secs
0.00
0.00 / 600.00 RW Real
235 RO0 Off Time
Relay Output 0 Off Time
Sets the “OFF Delay” time for the digital outputs. This is the time between the
disappearance of a condition and de-activation of the relay.
Units:
Default:
Min/Max: Secs
0.00
0.00 / 600.00 RW Real
240 TO0 Sel
Transistor Output 0 Select
Selects the source that will energize the relay or transistor output.
Any status parameter bit can be used as an output source. For example P935 [Drive
Status 1] Bit 7 “Faulted.”
Default:
Min/Max: 0
0 / 159999.15 RW 32-bit
Integer
241 TO0 Level Sel
Transistor Output 0 Level Select
Selects the source of the level that will be compared.
Default:
Min/Max: 0
0 / 159999 RW 32-bit
Integer
242 TO0 Level
Transistor Output 0 Level
Sets the level compare value.
Default:
Min/Max: 0.0
–/+1000000.0 RW Real
243 TO0 Level CmpSts
Transistor Output 0 Level Compensation Status
RO 16-bit
Integer
Status of the level compare, and a possible source for the transistor output. Transistor Output 0 Select must have this selected to energize the output. Can be used
without a physical output as status information only.
Bit 0 “Less Than” – Level source is less than the level value.
Bit 1 “Grt Than Equ” – Level source is greater than or equal to the level value.
Bit 2 “Abs Less Than” – Absolute value of the level source is less than the absolute value of the level value.
Bit 3 “AbsGrtThanEq” – Absolute value of the level source is greater than or equal to the absolute value of the level value.
Fi
le
Grou
p
No. Display Name
Full Name
Description Values
Re
ad
-W
ri
te
Da
ta
T
ype
753
Options
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Re
se
rv
ed
Ab
sG
rt
Th
an
Eq
Abs L
ess
T
han
Gr
t T
han
E
qu
Le
ss T
han
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = Condition False
1 = Condition True
753
753
753
753
753
753
Options
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Res
er
ve
d
Ab
sG
rt
Th
an
Eq
Ab
s L
ess
Th
an
Gr
t Th
an
Eq
u
Le
ss
Th
an
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = Condition False
1 = Condition True