Rockwell Automation 21G PowerFlex 750-Series AC Drives Programming Manual - Manual (Page 485)

Rockwell Automation Publication 750-PM001J-EN-P - October 2014 485
Using DeviceLogix Appendix C
Parameters See page 243 Embedded DeviceLogix parameter descriptions.
Function Block Elements The following function block elements are available:
Bit and Analog I/O
(1)
Process
Filter
Select/Limit
Statistical
Timer/Counter
Compare
Compute/Math
Move/Logical
Macro Block
(1)
Bit and Analog I/O do not count against the Function Block total. All other
elements count, with each instance counting as one Function Block.
The DeviceLogix Editor provides a graphical interface for configuring Function
Blocks to provide local control within the drive. DeviceLogix Editor navigation
and programming basics is not covered in this manual. See the DeviceLogix User
Manual, publication RA-UM003A for more information. It can be found on the
RA Literature Library web site at: http://www.rockwellautomation.com/
literature.
Macro Blocks
The user can create up to three Macro Blocks, and each can be used 10 times. The
selections are empty until a Macro Block gets created. The user also creates the
icon text that is associated with each Macro Block.