Yaskawa FSP Amplifier User Manual
Page 223
FSP Amplifier User’s Manual
Chapter 7: Using the Panel Operator
7-32
3.
Press the DATA/SHIFT key for a minimum of one second, and the
display will be as shown below.
4.
Press the MODE/SET key. Each time the MODE/SET key is pressed,
the monitor output will toggle between the displays for the two
channels shown below.
MODE/SET key
Displayed
alternately
5.
Press the DATA/SHIFT key for less than one second, and the analog
monitor gain parameter will be displayed. Pressing the DATA/SHIFT
key again for less than one second will return to the display shown in
steps 3 or 4 above.
MODE/SET key
Displayed
alternately
Data display
6.
Press the Up Arrow or Down Arrow key to perform zero adjustment
of the analog monitor output.
Data setting change
7.
When zero adjustment has been completed for the two channels, press
the DATA/SHIFT key for a minimum of one second to return to the
Auxiliary Function mode display.
This completes the manual zero adjustment of the analog monitor output.