B.2. wiring for noise control, B.2. wiring for noise control wiring example – Yaskawa FSP Amplifier User Manual
Page 320
FSP Amplifier User’s Manual
Appendix B: Special Wiring
B-5
B.2. Wiring for Noise Control
Wiring Example
This servo amplifier uses high-speed switching elements in the main
circuit. It may receive “switching noise” from these high-speed switching
elements if wiring or grounding around the servo amplifier is not
appropriate. To prevent this, always wire and ground the servo amplifier
correctly.
This servo amplifier has a built-in microprocessor (CPU). To protect it
from external noise install a noise filter in the appropriate place.
The following is an example of wiring for noise control.
FSP Amplifier
Note: * When using a noise filter, follow the precautions in Using Noise Filters on the following page.
** For ground wires connecting to the casing, use a wire with a thickness of at least 0.005 in
2
(3.5
mm
2
), preferably a braided flat copper wire.