Wiring encoders (for sgmgh and sgmsh motors only), Encoder connections, Incremental serial encoders – Yaskawa FSP Amplifier User Manual
Page 49: Absolute serial encoders
FSP Amplifier User’s Manual
Chapter 3: Wiring
3-24
3.5. Wiring Encoders (for SGMGH and SGMSH Motors Only)
The following sections describe the procedure for wiring a servo amplifier to the
encoder.
3.5.1. Encoder Connections
The following diagrams show the wiring of the encoder output from the
motor to CN2 of the servo amplifier, and PG output signals from CN1 to
the controller. This applies to both incremental and absolute encoders of
SGMGH and SGMSH motors only. The numbers in parentheses ( ) are
applicable to SGMAH motors. For SGMPH motors, refer to the Sigma
FSP Servo System Catalog (YEA-KAA-FSP-6).
Incremental Serial Encoders
FSP Amplifier
Output line driv er SN75ALS194
manuf actured by Texas
Instruments or equiv alent.
Applicable line
receiver SN75175
manufactured by
Tex as Instruments
or equivalent.
Absolute Serial Encoders
FSP Amplifier
Output line driver SN75ALS194
manufactured by Texas
Instruments or equivalent.
Applicable line
receiver
SN75175
manufactured by
Texas
Instruments or
equivalent.