Yaskawa FSP Amplifier User Manual
Page 278
Advertising
FSP Amplifier User’s Manual
Chapter 9: Inspection, Maintenance, and Troubleshooting
9-13
A.41: Main Circuit DC Voltage Error Detected:
Undervoltage
Display and Outputs
Alarm Outputs
Alarm Code Output
ALO1 ALO2
ALO3
ALM Output
OFF OFF
ON OFF
Note: OFF: Output transistor is OFF (alarm state).
ON: Output transistor is ON.
Status and Remedy for Alarm
During servomotor
operation.
When main circuit
power is turned
ON.
When the control
power is turned ON.
A, B, C
D
A, B, C
Cause of the Problem
Solution
A
The power supply voltage
exceeds specified range.
Check power supply voltage.
B Fuse
blown.
C
Defective rectifying diode.
D Defective
servo
amplifier.
Replace servo amplifier.
Advertising