B.6. reactor for harmonic suppression – Yaskawa FSP Amplifier User Manual
Page 330
Advertising
FSP Amplifier User’s Manual
Appendix B: Special Wiring
B-15
B.6. Reactor for Harmonic Suppression
FSP Amplifiers have DC reactor connection terminals for power supply
harmonic suppression.
Connecting a DC Reactor
The DC reactor is connected in series to the rectifier circuit’s output side.
Refer to 3.2 FSP Amplifier Internal Block Diagrams.
+ 1
+ 2
DC reactor
FSP Amplifier
By default the FSP Amplifier is shipped with (+)1 and (+)2 terminal short-
circuited. Remove the lead wire between the two terminals and connect the
DC reactor instead.
DC Reactor Specifications
For DC reactor specifications provided by Yaskawa, refer to Appendix C
of this manual.
Advertising