Yaskawa MEMOCON GL120 - Manual (Page 118)

System Components: Functions and Specifications
4.3.3 Specifications of CPU Modules cont.
— 4-62 —
Item Specifications
Program Memory Capacity 8K words (1 word: 24 bits)
Maximum I/O Points 1) Digital I/O points: 1,024 points max. (1 point: 1 bit)
2) I/O registers: 512 registers max. (1 register: 16 bits)
3) Local I/O:
D Number of channels: 1
D Number of Racks: 4 Racks max. including CPU Rack.
D Number of mountable I/O Modules: 54 max.
The total number of remote I/O points and registers must meet the above conditions
1) and 2).
4) Remote I/O:
D Number of channels: 2
D Number of stations per channel: 15
D Number of Racks per channel: 4 Racks max.
D Number of I/O points per station:
(Digital input points ÷ 8) + (Input registers x 2) ≤ 512 bytes
(Digital output points ÷ 8) + (Output registers x 2) ≤ 512 bytes
The total number of local points and registers must meet the above conditions 1) and
2).
Maximum points of coils and
relays
1) When the number of data registers is the initial value, the following condition must
be met:
(Number of coils) + (Number of relays) ≤ 65,520
2) The maximum value of each reference can be freely set within the above limit from
the Programming Panel (Unit: point (1 point = 1 bit)).
Coil/Relay Setting range Setting unit Defaults Example 1 Example 2
Coils 16 to 65,472 16 8,192 60,400 65,472
Link coils 0 to 4,096 1,024 2,048 2,048 0
MC coils 0 to 65, 512 256 512 512 0
MC control
coils
0 to 65, 320 160 320 320 0
Input relays 16 to 65,472 16 1,024 1,024 16
MC relays 0 to 65, 512 256 512 512 0
MC control
relays
0 to 65, 512 256 512 512 0
M code
relays
0 to 65, 192 96 192 192 0
Note: Number of I/O allocatable input relays = 1024 − (Number of output coils which
have been allocated)
4