Yaskawa MEMOCON GL120 - Manual (Page 186)

System Components: Functions and Specifications
4.4.5 MEMOBUS Modules (RS-232) cont.
— 4-130 —
Table 4.55 Example of Devices Connectable to MEMOBUS Ports
Type Device Remarks
MEMOBUS
master
P120-series
Programming
Panel
D Set MEMOBUS port to slave port.
D Communications performed using the MEMOBUS protocol
Personal computer
(with MEMOSOFT)
D Creation of communications program not needed.
If d h MEMOSOFT
ACGC4000/400-
series FA Monitor
D If your computer does not have MEMOSOFT, create a
communications program based on the MEMOBUS
protocol.
ASCII
devices
Bar code reader D Set the MEMOBUS port to combined master/slave port.
D Set the MEMOBUS port to transparent mode.
Serial printer
Set the MEMOBUS port to transparent mode.
D Create a communications program using the COMM
instructions in the GL120 and GL130.
b) For details on MEMOBUS port specifications, refer to Table 4.54 on page 4-129.
c) An example using a MEMOBUS Module (RS-232) is shown below:
Example 1
Connecting MEMOBUS Masters
Communications by MEMOBUS protocol
DI
Set MEMOBUS port of
MEMOBUS Module as
follows:
D Slave port
Monitor information
Setting information
Programing information
M
PS10 DI MEM
232
M
M P MB12
Slot No.
W0221-03
MC20
Local channel
Rack 1 (CPU Rack)
CPU20
1 2 3 4 5 6 7 8 9 10 11 12
DI DO DO
Communications by MEMOBUS protocol
W0203-03
M
Programming Panel P120C
Monitor information
ACGC4250 FA Monitor
4
A EXAMPLE "