Yaskawa MEMOCON GL120 - Manual (Page 398)

5.2 Installing Mounting Bases and Modules
— 5-41 —
2) Install the Module on the Mounting Base as shown below.
a) Hook the Module to the Module hook on the Mounting Base.
Module hook
Module
connector
Mounting Base
PCLINK
b) Rotate the Module until it comes into contact with the Mounting Base.
Module hook
Module
connector
Rotate
PCLINK
c) Fit the Module into the Mounting Base to make an electrical connection with the Mod-
ule connector.
PCLINK
5