Yaskawa MEMOCON GL120 - Manual (Page 366)

5.1 Designing the Control Panel
— 5-9 —
b) The distance between Mounting Bases must be at least 100 mm.
c) The distance between a Mounting Base and the wire duct above the Mounting Base
must be at least 50 mm.
d) The distance between a Mounting Base and the wire duct below the Mounting Base
must be at least 30 mm.
Device or structure
Mounting Base
80 mm min.
Wire duct
Device
mounting
steel
plate
Mounting Base
Wire duct
30 mm min.
50 mm min.
100 mm min.
30 mm min.
5