Yaskawa MEMOCON GL120 User Manual
Page 375
Advertising
Installation and Wiring
5.2.1 Installing Mounting Bases cont.
— 5-18 —
e) Install the Mounting Base on the DIN track according to the following procedure:
(1) Pull down the DIN track slide locks on the Mounting Base to release these locks.
Module connector
(with a cover)
DIN track slide
lock
Pull down
(2) Hook the DIN track hook of the Mounting Base on the upper edge on the DIN
track.
DIN track hook
Mounting Base
DIN track slide lock
DIN track
5
Advertising
This manual is related to the following products: