Yaskawa MEMOCON GL120 - Manual (Page 389)

Installation and Wiring
5.2.4 Installing the Terminal Block for Field Connection Module cont.
— 5-32 —
3) Install the appropriate terminal block on the Module as shown below.
a) Fit the terminal block onto the Module.
Terminal block
Module Fit in
b) Tighten the two terminal block mounting screws alternately.
Terminal block mounting screw
Terminal block mounting screw
Terminal block
c) Tighten the terminal block mounting screws until the terminal block closely attaches to
the Module as shown in the following figure.
Module
d) Close the terminal block cover.
5