Yaskawa MEMOCON GL120 - Manual (Page 297)

4.6 Special Purpose Modules
— 4-241 —
3. Specifications
1) Hardware Specifications
The following table shows the hardware specifications of the Pulse Catch Module.
Table 4.99 Hardware Specifications of Pulse Catch Module
Item Specifications
Voltage Used 12 VDC 24 VDC
Name Pulse Catch and Counter Module
Module Name COUNTER-16CH
Model No. JAMSC-120RDI34400
Rated Voltage 12/24 VDC
Maximum Permissible
Voltage
30 VDC
Input Type Sourcing/sinking
Rated Current 5.0 mA 10.5 mA
Input Impedance 2.2 kΩ
Standard Operating
Range
Minimum ON Voltage: 9 VDC
Maximum OFF Voltage: 5 VDC
Input Type Does not conform to JIS B 3501. DC type 2 according to JIS B
3501.
Number of Commons 1
Input Points per Common 16 points per common
External Connections 40-pin connector: 1
Connector model: FCN-365P040 (made by Fujitsu Ltd.)
Input Points 16 points (when using pulse catch and counter functions together)
Input Signal Indicators Light for each point that is ON, internal logic
Isolation Method Photocoupler isolation
External Power Supply For signals: 12 VDC For signals: 24 VDC
Derating Conditions None
Internal Current
Consumption
5 VDC, 200 mA (when all points are ON)
Maximum Heating Value 6 W
Hot Swapping Permitted.
Approximate Mass 300 g
External Dimensions 40.3 ¢ 130.0 ¢ 103.9 mm (W x H x D)
4