Yaskawa MEMOCON GL120 - Manual (Page 221)

4.4 Communications Modules
— 4-165 —
5) Reset Switch
a) Press the reset switch at the following times:
(1) When you have changed the setting of the DIP switch.
(2) When errors have occurred.
b) When the reset switch is pressed, communications between the local Uniwire Inter-
face Module and the Uniwire System devices will be interrupted. The communica-
tions will restart when the switch is released.
6) Related Manuals
Before operating a Uniwire Interface Module, read the following manual carefully and be
sure that you fully understand the information on specifications, application methods,
safety precautions, etc.
• MEMOCON GL120, GL130 Uniwire Interface Module User’s Manual
(SIEZ-C825-20.26)
7) Uniwire System
The Uniwire System is a product of NKE Pty Ltd. For detailed information on Uniwire
Systems, please read the technical documents and materials issued by NKE Pty Ltd.
Yaskawa also markets products for Uniwire Systems. Please contact the following office
for details:
Tokyo Office, Yaskawa Control Co., Ltd.
Phone: 03-3907-3171
4